Request a callback
A sunny lounge with a heat pump, a notepad and a calculator on the coffee table

What Affects Heat Pump Installation Cost in NZ?

  • Free written quote, no obligation
  • Licensed electrician on the connection
  • Auckland-wide, all major brands

Get a free quote

Free written quote. No obligation. We reply by phone.

  • Free written quote
  • No obligation
  • Licensed electrician

Heat pump installation cost in NZ depends on ten things: the size of the unit, its brand and model, the type of unit, the pipe run, the outdoor unit position, the electrical work, access, removal of an old unit, how many rooms you heat and whether you qualify for a grant. The installed price is more than the price of the unit alone, because it includes labour, pipework, electrical work and commissioning. The only way to get an exact figure for your house is a written quote. Ask us for a free one and we will list every item.

Get a free quote

What affects the cost of installation

The install usually decides which quote is higher, more than the unit does. Installation complexity and labour time drive most of the difference. These are the factors, roughly in order of how much they move a quote.

Unit size and kilowatt rating

A larger kilowatt rating means a bigger unit, and a bigger unit costs more to buy. A bedroom needs far less capacity than a large open-plan living area. Buying too big adds cost at purchase and on the power bill. Our size guide shows how to choose.

Brand and model tier

Each brand has basic, mid-range and top models. The higher tiers add features such as better filters, wifi control and higher efficiency. Compare Mitsubishi Electric, Daikin, Fujitsu and Panasonic on their own pages, and see our best heat pump guide.

Wall, floor or ducted

A wall-mounted unit is the simplest install. Floor-mounted and ceiling cassette units need different fixing and often more labour. A ducted system is the largest job of all, and our ducted heat pump cost guide covers it.

Back-to-back or a long pipe run

The shortest, simplest job has the outdoor unit directly behind the indoor unit on the same wall. Every installer includes a standard length of pipework, and extra length adds material and time. A unit on the far side of the house, with the pipe routed through the roof or subfloor, adds more.

Outdoor unit position and brackets

Outdoor units go on wall brackets, a floor stand or a concrete pad. Brackets are the simplest, and a pad or a stand on a sloping section takes more work. The position also affects airflow and noise for your neighbours.

Electrical work and switchboard capacity

A licensed electrician connects the heat pump. A switchboard with no spare circuit, or an older board that needs upgrading, adds to the job. Older homes are the most likely to need attention here.

Access

Second-storey units need ladders or scaffolding and a second person. Tight spaces, ceiling cavities and hard-to-reach walls take longer. Brick, fibre cement and weatherboard each need different tools and fixings.

Removing an old unit

Taking out an old heat pump, and handling its refrigerant correctly, is not always part of a standard quote. Ask whether it is included. See heat pump replacement.

Multi-room and zoning

A multi-split shares an outdoor unit between several indoor units, which cuts the outdoor units but adds pipework to each room. Doing several rooms in one visit usually saves set-up time compared with separate visits.

Grants and eligibility

A Warmer Kiwi Homes grant from EECA can reduce what you pay if you qualify. The cap is $3,450 for a single high-wall heat pump, and you need to meet every one of the eligibility rules. Our grants and subsidies guide explains who qualifies.

Making good

Some installs involve patching a wall or lining after the pipe route. Villas with timber lining or plaster can take more care. Ask whether making good is in the quote.

Most home installs do not need a building consent, and we check before we start. Apartments and townhouses on a unit title usually need body corporate approval, and the paperwork and a longer pipe run can add to the job.

Items that are easy to miss

  • Extra pipe length beyond the standard run
  • Electrical upgrades
  • Making good after the install
  • Removing an old unit
  • A wifi controller, which is sometimes an optional extra
  • Servicing after the first year. See heat pump servicing.

Ask about each when you request a quote.

What a good quote includes

A multi-room outdoor heat pump unit with neat pipework beside a house

A good quote lists everything so you can compare it with the next one. Look for:

  • The brand, model and capacity of each unit
  • The length of pipework and cable included, and what extra length involves
  • What the outdoor unit sits on
  • The electrical connection by a licensed electrician
  • Commissioning and a walk-through
  • Making good after wall penetrations
  • Removal of packaging
  • Manufacturer warranty and workmanship cover
  • A clear total

If a quote leaves any of these out, ask for them to be added.

Comparing quotes

Compare quotes for the same room, the same unit capacity and the same inclusions. Check the heating capacity, the unit type, the pipework, the electrical work, the outdoor mounting, the warranty and the finish. The cheapest quote is not always the best value, so check the inclusions. If one quote is far lower than the rest, find out what has been left out. If one is far higher, ask why. We will go through another installer's quote with you.

Auckland jobs

Villas and bungalows with high stud ceilings can lengthen pipe routes. Coastal sites may need a sheltered outdoor unit position. Narrow sections leave little room for an outdoor unit. New builds and townhouses are usually simpler because the pipe routes and electrical supply can be planned early, although body corporate rules can apply.

When to install

Autumn, before the first cold snap, is a good time. You can install a heat pump at any time of year, but winter is the busiest booking period. A summer install also gives you cooling for the humid months. See heat pump installation for how a job runs.

Running costs and savings

Running costs depend on the unit's size, the hours it runs, the temperature you set, how well insulated the room is and your electricity plan. A heat pump uses less power than a plug-in electric heater for the same heat, and a well-sized unit running steadily is the most efficient way to use it. Good insulation and a sensible set temperature add to the savings.

Get a free written quote

Tell us the room you want to heat. Our team replies with a plan and a written quote that lists every item.

Get a free quote

Talk to a person about this job.

Questions

What decides the cost of installing a heat pump in NZ?

The size and brand of the unit, the length of the pipe run, where the outdoor unit goes, the electrical work, how easy the house is to access and whether an old unit has to come out. The room matters as much as the unit.

Does the quote include the heat pump itself?

Usually yes. Most installers quote supply and install together. Check that the quote lists the unit model, the pipework included and the electrical connection, so you can compare it with other quotes.

Why do quotes vary so much between installers?

Quotes differ because of the brand and model, the size, what is included and how much work the install needs. Some leave out the electrical connection or extra pipe length. Compare what is included, not just the total.

Is a heat pump cheaper to install in a new build?

Often yes, because the builder can plan the pipe runs and electrical supply during construction. Retrofits take more work where walls are hard to get through or the switchboard needs attention.

Does installing several rooms change the cost?

Yes. A multi-split shares one outdoor unit between several indoor units, and several rooms in one visit usually need less set-up time than separate visits. We compare both options in the quote.

Are there grants to help with installation?

Some households can get a Warmer Kiwi Homes grant, capped at $3,450, for a single high-wall heat pump if they meet EECA's eligibility rules. Our grants guide explains who qualifies.

How do I get an exact figure for my house?

Ask us for a free written quote. We look at your room and your house and list every item in one document.

How much does it cost to run a heat pump?

Running costs depend on the unit's size, the hours it runs, the temperature you set, how well insulated the room is and your electricity plan. A heat pump uses less power than a plug-in electric heater for the same heat.

Are cheaper heat pump installations worth it?

A lower quote can be fine if it includes the same unit, pipework, electrical work and handover as the others. If it leaves things out, you may pay for them later. Compare what is included, not just the total.

Get a free quote

Tell us the address and the job. We will call you back.

Request a callback

Free written quote. Licensed electrician. Auckland-wide.

Tell us about the job

Free written quote. No obligation. We reply by phone.

  • Free written quote
  • No obligation
  • Licensed electrician
Call us Request a callback